Sorry, this entry is only available in Japanese.
Author Archives: admin
CT-IRKEY Revision history
[CT-USB-PW] USB Power Meter
No. 4th, USB Power Voltage and Current Measuring Device!
Precautions when using (Updated on 16 June 2013)
In order to increase the accuracy of the measurements, the meter display will be cleared to 0 while the power switch is just turned on without connecting to any device. (No Watt consumption)
The value display starts from 0 then up
The current and voltage values cannot be measured correctly if the meter display of CT-USB-PW has not be back to 0 while the power switch is just turned on.
After the meter display turns back to 0, target device can be changed for measurement while CT-USB-PW is connected with the Host-side.
Please click here for reference infos
Please click here for downloading the user manual
Features:
Support USB1.1, USB2.0, USB3.0
Display all the current and voltage values of the USB devices connected to this USB Power Meter
Operation
1. Please connect the USB Power Meter into Host machine. Note: At this time, no target devices should be connected.
2. When the Meter is ready for use, it will display 0.00A.
3. Please connect a target device to the USB Power Meter.
4. The mode of the Meter can be changed by pressing button as follows.
Package Contents
- USB Power Meter
- UserManual
Specification
- Model Name: USB Power Meter
- Current Value Error +/-2% (+/-0.04A for 0.1 ~ 2.00A)
- Voltage Value Error +/-1% (+/-0.05V at 5V)
- Note: Current values of less than 0.05A are not measured and are displayed as 0.00A
- Model Code: CT-USB-PW
- JAN: 4549032005462
- Size 22mm(H) x 65.8mm(L) x 10mm(W)
- Weight 13g
- Operating Conditions Temperature 5~35℃ , Humidity 20~80%
(None condensing) - Power Consumption 10mA (at 5V)
Supported Environments
HOST Machine and Device equipped with USB Port
※ Cannot promises to support all the computer equipments in the nature of the product.
[CT-25-ERP] 2.5inch HDD closure JIGEN
[CT-DB300] USB 3.0 SD Duplicator & Media RW
2nd item from Centech!
- Using main ICs from Japanese manufacturers
- Stand-alone SD media duplicate & Erase without PC connection
- Support high speed transfer rate SDR104
- Complete erase by all sector overwritten
- High speed dual SD card reader & writer by USB3.0 connection with PC
- LED indicators for mode selected and progress check
- Supported SD cards: SDSC、SDHC、SDXC、SDHC UHS -1(SDR104)、SDXC UHS-1(SDR104)
Model:CT-DB300
Contents: CT-DB300, USB3.0 cable, Manual
Operating environment:
PC with USB2.0 or 3.0 interface for card reader & writer operation
Specifications:
Product Name: KoreDohdaiSD Model: CT-DB300
Interface: USB3.0 or USB2.0
Supported SD: SDSC、SDHC、SDXC、SDHC UHS -1(SDR104)、SDXC UHS-1(SDR104)
Supported file system: No restriction fro file system as sector copy for whole area
Size: W116xH15xD74mm (No protrusions measured)
Weight: Around 193 grams (No accessories measured)
Operating conditions;
Temperature 5 to 35 centi degrees, Humidity 20 to 80% (no condensation)
Power consumption: 5V 450mA